Choose desired force on gas springs

SODEMANN-SPRINGS.US is now able to pressure fill gas springs according to your wishes. See the options below or use our form to enquire about or order the exact spring you want to fit your design. We will contact you with price and delivery information within an hour during normal working hours, and we offer rapid production and dispatch the same day as the order is placed, if required. We deliver high quality – fast.

Available pressure and quantity
We can fill our gas springs with exactly the pressure you need. However, the pressure must be within the limits of what the selected gas spring can technically handle. See the chart below.
There is no requirement for a minimum quantity. You can order 1 item or exactly the number you want.

Increasing the pressure
It can be difficult to define exactly what pressure you need when ordering gas springs – many variables come into play. But don’t worry! If you’ve ordered gas springs with too little force, we can usually increase the pressure. We cannot reduce the pressure. Send the gas springs to us along with information on the desired increased N. We cannot guarantee to achieve an exact pressure – but we’ll do our best. You will have to expect a few gas springs to be used to adjust the filling process, so these cannot be returned or replaced. The cost of increasing the pressure is USD 33,00 for the first gas spring, and USD 2,50 for each additional gas spring. Prices excl. VAT.

Special laser engraving
SODEMANN-SPRINGS.US basically laser-engraves standard information on the gas spring cylinders. However, if you want specific text/information laser-engraved on the cylinder, we can also help with that. For example, we can engrave your company name and inventory number, or ???. There are certain limitations, e.g. we cannot laser-engrave logos, special text fonts, colours, etc. The text/information must consist of letters and numbers. Please send an e-mail to [email protected] with the exact description of the requested information. We will then investigate and get back to you. The cost of laser-engraving is USD 33,00 for the first gas spring, and USD 2,50 for each additional gas spring. Prices excl. VAT.

Quality control
Where there are requirements for a precise force or tolerance, or for a general quality control, we may carry out a precise quality control and include documentation in the dispatch. You can also obtain a test report on the filled gas springs. The cost is USD 30,00 for the first gas spring, and USD 2,50 for each additional gas spring. It is up to you to choose how many you would like to have tested. Indicate in the comments field if you would like this done.

Possible combinations

GF (Black painted with threads)
GF version
Rod size:
Slaglængde:
Force:
6 mm
20 - 200 mm
50 - 400 N
8 mm
50 - 250 mm
100 - 650 N
10 mm
100 - 400 mm
150 - 1200 N
14 mm
150 - 500 mm
150 - 2500 N
GFRF (Stainless steel 304 with threads)
GFRF version
Rod size:
Slaglængde:
Force:
6 mm
20 - 200 mm
50 - 400 N
8 mm
50 - 250 mm
100 - 650 N
10 mm
100 - 400 mm
150 - 1200 N
14 mm
150 - 500 mm
150 - 2500 N
GFRF 316 (FDA approved oil. Stainless steel 316 with threads)
GFRF version
Rod size:
Slaglængde:
Force:
6 mm
20 - 200 mm
50 - 400 N
8 mm
50 - 250 mm
100 - 650 N
10 mm
100 - 400 mm
150 - 1200 N
14 mm
150 - 500 mm
150 - 2500 N
BE (Black painted with welded eyes)
BE version
Rod size:
Slaglængde:
Force:
6 mm
20 - 150 mm
50 - 400 N
8 mm
60 - 250 mm
100 - 650 N
10 mm
95 - 395 mm
150 - 1200 N
TGF (Black painted with threads)
TGF version
Rod size:
Slaglængde:
Force:
8 mm
20 - 200 mm
100 - 800 N
10 mm
50 - 300 mm
150 - 1200 N

Configure your springs below

Material Rod size Stroke length Newton Desired no. of springs

1. Material

GF
GFRF
GFRF 316
BE
TGF

2. Rod size

3. Stroke length

4. Newton

5. Desired no. of springs

Contact information
Name

E-mail
Comments (ie. Delivery date or if a test report is required)

Gas spring configurator

You can also build your own gas spring with end-fittings based on size and pressure we offer. Use our gas spring configurator:

Gas spring configurator

Internet Explorer Incompatibility

This website unfortunately does not work well with Internet Explorer. We recommend using one of the following free browsers:

Copyright © 2024 Sodemann-Springs.US. All rights reserved.