Technical data - Disc springs

Material
Material thickness t less than 1.25 mm
  Black Stainless steel
Classification CK 67, CK 75 and CK 85
in accordance with DIN 17222
W. No. 1.4310
Working temperature Between -20 ºC and +100 ºC Between -200 ºC and +200 ºC
Shaping Punched, cold-moulded with bevelled edges
 
Material thickness t from 1,25mm to 6,00 mm
  Black Stainless steel
Classification 50 CRV 4 in accordance with DIN 17222 and DIN 17221 W. No. 1.4310
Working temperature Between -20 ºC and +100 ºC Between -200 ºC and +200 ºC
Shaping Punched, could-moulded and turned diameters
 
Material thickness t from 6,00
  Black Stainless steel
Classification 50 CRV 4 in accordance with DIN 17222 and DIN 17221 W. No. 1.4310
Working temperature Between -20 ºC and +100 ºC Between -200 ºC and +200 ºC
Shaping Cold or hot-moulded, and all surfaces machined

 

 
Tolerances

The force given is intended as a guide, with scope for large tolerances.

Force F in hte tables is 75% of max. force in the interests of safety/service life.

The dimensions in the catalogue are unmachined measurements. Therefor measurements may differ from those in the catalogue tables. This applies to diameters and thickness.

 
Terminology

De = External diameter in mm
Di = Internal diameter in mm
t = Material thickness in mm
L0 = Unloaded length in mm
L = Height on load F
F = Load in N at s (75%)
s = Travel/compression in mm (Lo - L)

Tallerken _term _ol
 

Disc springs

Go to the selection of Disc springs

 
0

Do write us!
If you have any questions, please contact us through this formular or send us an email contact@sodemann-springs.us










We will get back to you as soon as possible!

 

Our customers are the best judges!
Your opinion is highly valued. Any comment is much appreciated!







 

Cookie information

This website uses cookies.

By continuing to use the website, you are giving your consent to the use of cookies.

Read more here…