What is a die spring?

Painted high-force compression springs in rectangular wire

Die springs are a good choice in assemblies where high force is required for limited installation dimensions.

Die springs are selected according to the working hole and shaft diameter. There has to be room for a die spring to work without hindrance, so the starting point is not the physical dimensions of the die spring but the installation dimensions.


Hole diameter does not mean the outside diameter of the die spring, but specifies the diameter of the hole the die spring can work in.

The maximum travel should not be used or exceeded, as this will considerably lessen the service life of the die spring.
To avoid shock loads, a die spring must always be installed pretensioned.

 Button Die _UK  Button FAQ_UK


Diesprings _i _brug


Do write us!
If you have any questions, please contact us through this formular or send us an email contact@sodemann-springs.us

We will get back to you as soon as possible!


Our customers are the best judges!
Your opinion is highly valued. Any comment is much appreciated!


Cookie information

This website uses cookies.

By continuing to use the website, you are giving your consent to the use of cookies.

Read more here…